中文版 Collect this website Feedback Welcome to YingYuanBao Technology Official website!

Electronic product motherboard solution supplier

Power supply motherboard, intelligent cabinet, main control board

Contact Number:

86-755-83625855

Your location:Home > Products > Industrial control motherboard
FS9281 industrial control motherboard
FS9281 industrial control motherboard adopts arm926fs-j CPU, the main frequency is 454mhz, the onboard 128MB DDR2 + 256MB flash, pre installed Linux / genuine wince 6.0, and the overall dimension is 40mm × 50mm. The interface adopts standard PCIe specification, and the height between the main board and the bottom board is only 5.5mm, which is suitable for industrial equipment sensitive to structural dimensions
Online Service

Service hotline

86-755-83625855

PCIe interface small industrial control motherboard

FS9281 industrial control motherboard adopts arm926fs-j CPU, the main frequency is 454mhz, the onboard 128MB DDR2 + 256MB flash, pre installed Linux / genuine wince 6.0, and the overall dimension is 40mm × 50mm. The interface adopts standard PCIe specification, and the height between the main board and the bottom board is only 5.5mm, which is suitable for industrial equipment sensitive to structural dimensions

9281主板说明.png

Main board technical index

Core unit Core unit

● ARM9 industrial CPU (imx283), main frequency 454mhz

● 128MB DDR2 system memory, and the user's available space is about 100MB

● 256MB flash memory, user file space greater than 160MB

● 1-way USB main control port, supporting USB flash disk plug and play

● SD card interface, supporting SDHC format storage (up to 32GB)

● Real Time Clock RTC with time data power down protection

● Hardware watchdog (WDT) to prevent system deadlock

● The default configuration is TFT color LCD interface (RGB 6-bit + synchronous clock signal)

● Color display, resolution from 480 × 272 to 1024 × 768 can be configured (using CN3)

● Support 4-wire resistive touch screen

● Independent LCD display interface, standard 40 core FPC socket (0.5mm spacing)

Serial communication configuration Other communication interfaces

● 6 standard UART serial ports, of which 5 can be used by users, and the baud rate can reach 3mbps

  Com2 supports RTS / CTS hardware flow control

  COM3 is a 3-wire serial port with RS232 level

  COM4 - com5 are 3-wire serial ports with TTL level

  Com6 is a 3-wire serial port with TTL level and multiplexed pins with GPIO

● Fixed parameters of debugging serial port: 115200bps, 8-n-1

● 1-way Ethernet interface, 10m / 100M adaptive

● 1-way USB high-speed main control interface (host)

● 1-way USB OTG interface, supporting Microsoft ActiveSync communication protocol

● 1 channel I2C interface, main control mode, maximum baud rate of 400kbps, multiplexed with GPIO pin

● 1 channel SPI interface, master control half duplex mode, maximum baud rate 10Mbps, multiplexed with GPIO pin

● 2 PWM outputs, each output frequency and duty cycle can be set independently, and the pins are multiplexed with GPIO

● Support USB virtual serial port function

● Support USB external 3G network card

Digital and analog monitoring unit Mechanical parameters of power supply and module

● 12 bit general gpio0 – gpio11, input and output independently controllable

● Support real-time monitoring of motherboard ambient temperature and power supply voltage

● Power supply voltage: + 5V ± 5%, average working current 130mA

● Operating temperature: - 10 ℃ to 60 ℃; Industrial grade (- 40 ℃ to 80 ℃) optional

● Overall dimension of module: 40mm × 50mm, plate to plate height: 5.5mm

● Standard 52 core minipcie interface, reliable connection and convenient plugging

● Pluggable mechanical characteristics to ensure high maintainability of products

Recommendation

/ HOT PRODUCT
  • HONG KONG:FLAT A15/F GOLDFIELD IND BLDG 144-150 TAI LIN PAI RD KWAI CHUNG NT HONGKONG
  • Copyright 2023 Shenzhen YingYuanBao Technology Co., Ltd All rights reservedRecord No:

    Support:WanGuang NetWork

  • Mobile phone

  • Official account